Radiant Barrier Contractors Houston
Radiant barriers reflect heat from the sun before it can warm up insulation in an attic. They also reduce conductive and convective heat transfer. However, they must face an air space, and dust accumulation can decrease their effectiveness.
They are installed in homes – mostly in attics – primarily to reduce summer heat gain and cooling costs. These are especially important in hot climates like Texas.
Cost
Radiant Barrier Contractors Houston systems are a simple way to reduce summer heat gain in your home. They consist of a thin, foil-like material that reflects radiant energy instead of absorbing it. This prevents hot air from passing through your attic and into the rest of your house, saving you money on cooling costs. It can also help to keep your attic warmer in winter. The insulation experts at Ultimate Radiant Barrier, can survey your home and recommend the best type of radiant barrier to suit your needs.
A radiant barrier can be installed on existing homes or new construction. It can be sprayed on the attic floor of your home or placed between your rafters. It can also be combined with other types of insulation materials, including bat and roll and blown-in insulation. The type of attic insulation you choose and the level at which it is set will determine how well your radiant barrier performs.
Installing a radiant barrier on an attic can save you up to 20% in cooling costs. This is due to the fact that radiant barriers prevent hot air from entering the home and reducing your air conditioning costs. However, the amount of savings you’ll get from radiant barrier depends on several factors, including the size of your attic and the amount of sunlight it receives.
There are several types of radiant barrier available on the market, and they range in price and quality. The cheapest are one-sided radiant barriers that are reflective on only one side. They are often used as a starter product for homeowners who want to save money. However, they can tear easily and may not be as effective as other products.
You can find radiant barriers at your local home improvement store, but it is recommended that you hire a professional for installation. They can help you decide which type of barrier is right for your home and ensure that it is properly installed to maximize your energy savings. In addition, they can install a ridge vent to help keep the attic cool and avoid moisture buildup.
Benefits
Radiant barrier is a foil-like material that is installed in homes, usually in the attic, primarily to reduce summer heat gain and lower home cooling costs. The products reflect radiant heat instead of absorbing it, which can significantly reduce air conditioning energy consumption. There are several different types of radiant barriers on the market. Gulf Coast Windows offers Green Energy Barrier, which is a high-performance radiant barrier spray developed by NASA to protect astronauts from solar radiation while walking in space. It is effective at reflecting up to 80% of the sun’s heat, and it can lower attic temperatures by 30 degrees or more.
A radiant barrier is not a substitute for thermal insulation, which slows heat conduction. However, it can be combined with some types of insulation materials in reflective insulation systems. These assemblies can also reduce thermal resistance (R-value), though not as effectively as a single thermal insulation material. The products are made of aluminum foil that is applied to one or both sides of a variety of substrate materials, including kraft paper, plastic films, cardboard, and oriented strand board. Some are fiber-reinforced to increase durability and ease of handling.
These products can be installed on new constructions or in existing homes with accessible attics. They are especially useful in warm climates, and they can cut cooling costs by 5% to 10%. They can also allow homeowners to use smaller air conditioners.
The best time to install a radiant barrier is in the spring or fall, when the attic is less prone to overheating and condensation. However, it is possible to add a radiant barrier to a home at any time of year.
Radiant barriers are designed to be placed directly under the roof shingles, but they can also be installed over attic joists in existing homes with existing insulation. They are non-toxic and non-carcinogenic, making them an environmentally friendly option for home insulation. They are also easier to install than traditional fiberglass insulation, which requires a special type of installation.
When properly installed, radiant barriers can reduce summer heat transfer by up to 97%. They can also reduce attic temperatures by 20-45 degrees and decrease cooling expenses by 7% to 15%. Radiant barriers are also a good choice for retrofitting old houses with poor attic ventilation.
Installation
Radiant barrier works by reflecting the sun’s heat before it can warm up insulation in your attic. This helps the insulation stay cooler and your home stays warmer, saving you money on cooling costs. Radiant barriers are made of foil-like material that reflects radiant heat, unlike mass insulation materials that slow down or resist heat transfer. Think of astronauts’ space suits and Thermos bottles: they reflect the sun’s rays, keeping them cool.
While radiant barriers are best installed during new construction, they can also be added to existing homes, especially those with open attics. They are most often draped between roof joists in new construction, which allows the installer to minimize dust accumulation on the reflective surfaces (double-faced radiant barriers are available). They can also be stapled up over existing insulation, but this method may require more labor and doesn’t allow for easy access to the attic and ducts.
To calculate how much radiant barrier you’ll need, measure the square footage of your attic. If you’re stapling the radiant barrier up, subtract 6 inches from each length measurement to account for a 3-inch ventilation space at the top and bottom of the attic. Then, add up the totals to determine how many feet of radiant barrier you’ll need.
When choosing a radiant barrier, you’ll want to choose one with a low emissivity rating of.05 or.03 – this means it will effectively block 95% to 97% of the sun’s radiant energy. In addition to its insulating abilities, radiant barrier is an effective fire retardant and has a Class 1/A fire rating.
The cost of radiant barrier installation varies, depending on the number of layers and thicknesses you choose as well as how the material is installed in your home. Pro installs are generally more expensive than DIY but can save you a significant amount in energy savings over the long term.
When choosing a company to install radiant barriers, consider how long they’ve been in business and whether or not they’re licensed and insured. They should also have extensive experience in the industry. A good company will provide a free in-home consultation to help you decide which product and installation method is best for your home.
Maintenance
A radiant barrier is a foil-like material that is installed in homes — usually in attics — primarily to reduce summer heat gain and lower cooling costs. It reflects the sun’s radiant energy rather than absorbing it, which helps keep attic temperatures cooler. This can cut home cooling costs by up to 20% in hot climates like Texas.
These barriers are installed on the roof deck of an attic and typically cover a large area in order to reflect most of the sun’s heat. They can be added to new construction or retrofitted to existing homes with open attics. When correctly installed, a radiant barrier can cut cooling costs by five to 10 percent.
The team at Punbar is a family-owned company that offers a wide range of services to help customers improve the comfort of their homes. They perform a comprehensive evaluation of the home’s comfort systems, including the attic, and then recommend appropriate courses of action. Their services include duct cleaning, air flow testing, and insulation assessments. They are members of the National Comfort Institute and have received excellent customer reviews on Angie’s List.
Radiant Barrier Contractors Houston insulation is a great addition to any home, but it is particularly useful in a Texas home, where the temperature often exceeds 90 degrees. It works by reflecting the heat away from the house, keeping it cool in the summer and warm in the winter. It is also an effective solution for reducing your home’s energy consumption.
If you’re thinking of installing a radiant barrier, you should hire a professional contractor to ensure that the job is done properly. These professionals will use a reflective spray that can block up to 80% of the sun’s radiant heat from entering the attic. It will also keep the attic and your home’s air ducts cooler, saving you money in the long run.
The installation of a radiant barrier is easy and inexpensive, but it’s important to choose the right contractor. Look for a contractor with years of experience and excellent reviews. They should also provide a warranty for their work and be licensed and insured.
Radiant barriers reflect heat from the sun before it can warm up insulation in an attic. They also reduce conductive and convective heat transfer. However, they must face an air space, and dust accumulation can decrease their effectiveness. They are installed in homes – mostly in attics – primarily to reduce summer heat gain and…